[time-nuts] PCB connector for a 10811A

[Steve Rooke]

Thanks for the pointers David.

2009/3/12 David Forbes <dforbes at dakotacom.net>:
> At 4:45 PM +1300 3/12/09, Steve Rooke wrote:
>>I've been trying to find out where I can purchase a connector for a
>>10811A but with little success. From the manual it is listed as a
>>CINCH 250-15-30-210 but searching for that does not turn up anything.
>>I expect that it's going to be as easy to find as hens teeth over here
>>in New Zealand but I was hoping to find a supplier, say, in the US who
>>would ship to here. Anyone know where I should look for this please?
>>
>>Thanks, Steve
>>--
>
> Steve,
>
> The PC board edge connector is still widely made. This EDAC connector
> from Digikey might do the trick.
>
> EDC306150-ND   single sided   15 pin .156" pitch
> EDC307300-ND   double sided 2x15 pin .156" pitch
>
> --
>
> --David Forbes, Tucson, AZ
> http://www.cathodecorner.com/
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



-- 
Steve Rooke - ZL3TUV & G8KVD & JAKDTTNW
Omnium finis imminet