[time-nuts] HP 5370B vs SR620

Roy Phillips phill.r1 at btinternet.com
Wed May 20 13:04:06 UTC 2009


Bruce/Magnus
Thank you for your comments.
Roy

----- Original Message ----- 
From: "Bruce Griffiths" <bruce.griffiths at xtra.co.nz>
To: "Discussion of precise time and frequency measurement" 
<time-nuts at febo.com>
Sent: Wednesday, May 20, 2009 12:42 AM
Subject: Re: [time-nuts] HP 5370B vs SR620


> Hej Magnus
>
> One issue is that the SR620 is still in production.
> Thus obtaining spare parts may be a little easier than for the HP5370A.
>
> Bruce
>
> Magnus Danielson wrote:
>> Roy Phillips skrev:
>>> Jim
>>> I was interested to hear that you are very fond of your vintage
>>> Counter (HP5370B), and I have downloaded the manual from the Agilent
>>> website.
>>> I recently purchased an HP 5335A, again a vintage model, and I have
>>> yet to assess it completely  -  is the 5370B much superior ? The
>>> facilities on the 5335A seem to be similar.
>>
>> These are two different animals. I like my 5335A for its directness
>> and versatility, where as both 5370B and SR-620 takes a litte more
>> bending.
>>
>> Resolution and jitter wise the 5370B outperforms the 5335A, and the
>> SR-620 outperforms the 5370B.
>>
>> Cheers,
>> Magnus
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 





More information about the time-nuts mailing list