[time-nuts] 747 Chronometer

[Brooke Clarke]

Hi Charles:

It's probably a standard connector.  You need to look at it closely with 
a magnifying glass at all the surfaces for ID information.  99% of the 
time there's printed or engraved or moulded information that is enough 
to ID the panel receptacle.   Then it's straight forward to find the 
mating plug.  Figuring out the pin out is also not that difficult if you 
can open it up.
I'm working on a major addition to my connectors web page to help do 
some of that.
http://www.prc68.com/I/Conn.shtml

Have Fun,

Brooke Clarke
http://www.prc68.com



Charles Rushing wrote:
> Greetings To All,
>
>  
>
> Please accept my apologies in advance if this is off-topic.  I have just
> acquired an aircraft clock, which I've tentatively identified as coming from
> a Boeing 747.  It's way cool looking and would make a perfect dust collector
> in my ham shack if I could only power it up.
>
>  
>
> There is a multi-pin military-style twist-lock connector on the back, but no
> indication of what the pinout may be.  The unit is identified as:
>
>  
>
> "CLOCK, 3" 24 HOUR GMT ELECTRONIC
>
>  MFD BY A.W. HAYDON CO. PRODUCTS
>
>  NO. AMER. PHILIPS CONTROLS CORP.
>
>  Cheshire, Conn.
>
>  MFR'S. PT. NO. A15551-P1"
>
>  
>
> I've searched the Net for technical documentation, but could only find the
> reference to the 747.  Does anyone have any information about these clocks,
> or can someone point me in the right direction?
>
>  
>
> Many thanks in advance.
>
>  
>
> Chuck
>
> WA5MUV
>
>  
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>