[time-nuts] Vectron Osc.

[jmfranke]

For the CO-255 Series:

Holding the oscillator with the SMA connector up and looking at the bottom, 
reading left to righ;
1. Supply (+)
2. Case
3. N/C (No connection)
gap
4. 0V, Case

and below:
5. Case.

By the way, the A17 series has a stability rating for =15C t0 +35C of +/- 1 
part in 10,000,000.
Standard voltage is +15V @ <50mA for option R and output is >1.0Vrms/50 Ohms 
(+13 dBm)

I can send the data sheet if needed.

John  WA4WDL


--------------------------------------------------
From: <EWKehren at aol.com>
Sent: Wednesday, November 18, 2009 11:22 AM
To: <time-nuts at febo.com>
Subject: [time-nuts] Vectron Osc.

> I have two Vectron Labratories CO-255A17-R 400 MHz Crystal Oscillators 
> that
> I would like to use but have no information on. They are 2X3 inches 3/4
> high SMA  output and have five pins on the bottom, two are ground. Does 
> any
> one have  information.  Thank you
> Bert Kehren Miami
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>