[time-nuts] HP 5061 chassis parts

[Dave Carlson]

Chuck,

Sorry to hear you're closing down, after all these years. Drop me a line 
some time and we can talk.

Dave Carlson
(formerly HP, then Agilent)

----- Original Message ----- 
From: <service at frequencystandards.com>
To: <Time-nuts at febo.com>
Sent: Tuesday, September 08, 2009 19:38
Subject: [time-nuts] HP 5061 chassis parts


As some of you already know, I have closed down my frequency standards
business. I am in the slow process of getting rid of things. My time is
not my own right now. As of right now, I have a bunch of chassis parts I
am going to start with. I have some a number of things for the HP 5061s.
This includes unbroken side frames, handles, rack ears, plastic battery
cases, aluminum battery holders, side panels, rear panels, most of the
internal micon cables (not cut, just removed), and about anything else you
can think of. I have a lot of modules but am not ready to sell them until
I am able to test each of them. If you interested in any of the cabinet
parts, let me know off line at service at frequencystandards.com. Please do
not put in requests for other stuff at this time. I promise I will let the
list know before anything goes onto Ebay.
Chuck Norton



_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.