[time-nuts] TB question
Brian Kirby
kilodelta4foxmike at gmail.com
Sat Sep 12 01:07:56 UTC 2009
I have not tried setting parameters in Lady Heather, but the Trimble
Thunderbolt Monitor program has a field for this. Its under SETUP then
TIMING OUTPUTs. The first variable is PPS Offset. In my case its 128
ns, its entered as -1.280e-07.
Brian KD4FM
Gordon Batey wrote:
> Greetings to all timekeepers,
>
> I have been reading the list for some time now and have greatly benefited
> from the threads.
>
> I have been fortunate to get one of the latest TAPR Thunderbolts (thankyou
> tvb and TAPR). I also have built the TAPR distribution kit and it seems to
> be a great item also.
>
> I have the TBOLTMON and LadyHeather. LH is surely a work of art in my humble
> opinion. Great program.
>
> My question is related to the length of antenna cable. I measured it before
> installation and ran some rudimentary tests but have not been able to enter
> the cable delay anywhere. It is most likely in a perfectly logical location
> in one or both of these programs but I cannot seem to find it.
>
> Any suggestions would be appreciated.
>
> Thanks in advance,
>
> Gordon Batey
> WA4FJC at arrl.net
> or
>
> GPBATEY at compuserve.com
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
More information about the time-nuts
mailing list