[time-nuts] Oscillator/OCXO Cathodeon FS59

David C. Partridge david.partridge at dsl.pipex.com
Fri Sep 18 19:55:46 UTC 2009


PS this came from a Gould TC431 counter/timer, and pins 1-4 were connected,
but pin 5 wasn't,  So if anyone has a schematic for that counter/timer, then
at least part of the story could be clarified.

Dave

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of David C. Partridge
Sent: 18 September 2009 19:59
To: 'Discussion of precise time and frequency measurement'
Subject: [time-nuts] Oscillator/OCXO Cathodeon FS59

I have in my sticky mitts a Cathodeon Oscillator Type FS59 51/01 10.0MHz.
It might or might not be an OCXO.

Anyone know anything about these?   Five pins, the ones at the corners
marked 1 through 4, the fifth one either unmarked or the stamp didn't
register properly.   There's a trimmer access hole on the top.

Regards,
David Partridge


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.




More information about the time-nuts mailing list