[time-nuts] What's the latest correct PICTIC II Mouser project?

Steve Rooke sar10538 at gmail.com
Sat Aug 7 09:10:25 UTC 2010


Hi Bob,

I have the correct DIL 74175 so I can untick that item.

Steve

On 07/08/2010, Bob Camp <lists at rtty.us> wrote:
> Hi
>
> As far as I know all the parts are correct except the 74175. It is the soic
> version.
>
> Bob
>
>
>
> On Aug 6, 2010, at 7:16 PM, Steve Rooke <sar10538 at gmail.com> wrote:
>
>> Bob,
>>
>> Thanks for that, this Mouser project has all available parts. Do you
>> know if the pots, trimmers, etc. are ones as suggested for the correct
>> orientation, pin spacing, etc. as i believe there was some discussion
>> regarding this in among the many postings on this topic?
>>
>> Steve
>>
>> On 07/08/2010, Bob Camp <lists at rtty.us> wrote:
>>> Hi
>>>
>>> I believe the project at:
>>>
>>> http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8736DCEE10
>>>
>>> is up to date in (no un-orderable parts).
>>>
>>> Bob
>>>
>>> -----Original Message-----
>>> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
>>> Behalf Of Didier Juges
>>> Sent: Friday, August 06, 2010 8:36 AM
>>> To: 'Discussion of precise time and frequency measurement'
>>> Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
>>> project?
>>>
>>>
>>> I have not seen an answer to that question (for people in the US) ?
>>>
>>> I am waiting for the PWB, which I believe I paid for, and I am planning
>>> to
>>> buy or make (have not looked into that yet) a PIC programmer, since it
>>> looks
>>> like I may get some mileage out of that anyhow.
>>>
>>> No rush, but there is no good reason to delay either at that point.
>>>
>>> Thanks
>>>
>>> Didier
>>>
>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>>
>>
>>
>> --
>> Steve Rooke - ZL3TUV & G8KVD
>> The only reason for time is so that everything doesn't happen at once.
>> - Einstein
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


-- 
Steve Rooke - ZL3TUV & G8KVD
The only reason for time is so that everything doesn't happen at once.
- Einstein



More information about the time-nuts mailing list