[time-nuts] What's the latest correct PICTIC II Mouser project? - Heathkid

[Bob Camp]

Hi

Shortages... what shortages :)......?

The two offending resistors have been "bumped" to 1% standard values from 5% standard. Functionally there should be no difference at all. 

Sorry for the delay in getting it up dated. 

Bob


On Aug 13, 2010, at 1:47 AM, Heathkid wrote:

> Hello everyone.  I received my six (6) PICTIC II PCBs which are absolutely beautiful (after a couple minutes of standard cleaning with a pencil eraser which I do anyway to *any* PCB* I order) and I was getting ready to place my order for the components tonight but the following (in the "latest project") are now "back ordered" with estimated shipping dates of like October!  Any suggestions for equal or superior parts?  Please?  Does anyone have an updated "Mouser Project" that has all the "correct" or better quality parts in stock (equal to or better quality that spec'd)?
> 
> Here's what I've been trying to work with thanks to Bob Camp. Unfortunately, two of the components are now not available... help???
> 
> https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8736DCEE10
> 
> Mouser #:  271-620-RC
> Metal Film Resistors - Through Hole 620ohms 1% 50PPM
> 
> Mouser #:  271-2.4K-RC
> Metal Film Resistors - Through Hole 2.4Kohms 1% 50PPM
> 
> I'd like to place the complete order for all the components for my six PICTIC II's as quickly as possiible.
> 
> Thanks,
> 73 Brice KA8MAV 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>