[time-nuts] Small DMTD project PCBs Group Buy Update

Stanley Reynolds stanley_reynolds at yahoo.com
Thu Aug 19 04:27:11 UTC 2010


Just boards, 5 times 9.00 = $45 mailed payment  $47.5 Paypal 
two pictic, one DDS board, two mixer boards, note the PDF talks about a 3rd 
pictic as an option.

If you had another offset source no need for the DDS board. If you have Time 
interval counters that are interfaced to a computer then no need for the PicTic 
boards. Guess you could use the DDS board for other projects also.

Each mixer board has two identical channels so it would be possible to use just 
one in some applications.

I 'm offering the boards in any combination.

Stanley




________________________________
From: Eric Garner <garnere at gmail.com>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Wed, August 18, 2010 10:58:36 PM
Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update

Just to be clear, the ~48 dollar total includes all of the required boards( 
minus components) needed to make the dmtd setup work?

Thanks,
Eric

Sent from my Banana Jr. mobile device

On Aug 18, 2010, at 1:50 PM, Stanley Reynolds <stanley_reynolds at yahoo.com> 
wrote:

> Will place order in the next few days please email me with any suggested 
>changes
> to the mixer or DDS boards.
> 
> Stanley
> 
> 
> 
> ________________________________
> From: Stanley Reynolds <stanley_reynolds at yahoo.com>
> To: time-nuts at febo.com
> Sent: Sun, August 15, 2010 3:14:50 PM
> Subject: [time-nuts] Small DMTD project PCBs Group Buy
> 
> Any interest in boards at 8 USD each as before ?
> 
> The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS 
>board.
> 
> 
> 
> 5 boards plus shipping about 47.50 usd
> 
> Please email me off list with your interest.
> 
> I not sure if using the pictic II vs I board will present problems for the
> software.
> 
> Would also like to workout any changes to the DDS or Mixer Boards before I 
>place
> 
> the order.
> 
> Yes I still have PICTIC II boards from the first order and other parts for 
>them.
> 
> Stanley
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


More information about the time-nuts mailing list