[time-nuts] TBolt self survey
stanw1le at verizon.net
Wed Feb 10 04:40:43 UTC 2010
using the trimble T'boltMON software:
Start with a "factory reset" in the control menu
follow previous guidance of enabling the "save position" capability,
Then to restart a survey
go to the control menu (on left),
select "restart self survey"
In lady Heather V3.0 beta of 21 Jan '10 ( available from the KE5FX website):
keyboard enter a "s", for survey
then "s" for a standard survey,
use the default of 2000 samples, for a start
Time for me to go to bed.
Please advise of progress.
> Thanks Stan,
> I did that but I can't where to "start the survey" in TBolt. In lady heather there
> is a key for it.
> At 09-02-10, you wrote:
>> Hello Raj,
>> that location is probably where the coordinates were last saved. or there abouts....
>> Or those are the default factory settings from memory,
>> and new coordinates were never saved.
>> redo the survey and save the results.
>> using T'boltMON V2.60 on a PC:
>> go to menu "set up", then "self survey", click on the "save position flag"
>> then "set survey",
>> then "save segment",
>> then "close"
>> redo the survey and afterwards verify the local coordinates were saved.
>> Lady Heather (software) can also be utilzed for these functions.
>> Any problems, please advise.
>> Stan, W1LE
>> Raj wrote:
>>> Can someone point me to info that would clarify why my Tbolt's self survey puts my house (AFAIK ~920M ASL, 13N 77.35E) in the Pacific ocean, south of Vancouver and west of Seattle and about 10 meters under water. I am doing something wrong for sure!
>>> My sons iPhone gives me right co-ordinates but it's way off the altitude.
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
More information about the time-nuts