[time-nuts] any WWV audio recordings available?
wd6cmu at earthlink.net
Wed Feb 10 07:08:09 UTC 2010
First thing, clean the tin-plated board edge connectors and the
corresponding connectors on the motherboard. I always had to do that every
year or two to keep mine working. Squirt some cleaner on the spring
contacts and work the board up and down.
On Tue, Feb 9, 2010 at 10:35 PM, Don Latham <djl at montana.com> wrote:
> I was told that there were a couple of adjustment pots that went bad; I
> cannot remember which ones but they are in the feed from the receiver to the
> digital control if that makes sense. I sold the one I had a year or so ago.
> ----- Original Message ----- From: "Majdi S. Abbas" <msa at latt.net>
> To: "Discussion of precise time and frequency measurement" <
> time-nuts at febo.com>
> Sent: Tuesday, February 09, 2010 11:13 PM
> Subject: Re: [time-nuts] any WWV audio recordings available?
> On Tue, Feb 09, 2010 at 07:33:07PM -0800, Scott Burris wrote:
>>> Does anyone know if there are any > 5min recordings of WWV audio
>>> I'm trying to track down some problems with my Heathkit GC-1000 clock and
>>> it sure would be nice if I could inject some known good audio
>>> recording and see if
>>> the clock picks up the time from that.
>>> I've found a couple recordings by googling, but they are both too
>>> short to be useful.
>> Try this:
>> (Rather noisy; WWV-5 just now; WWVH-5 in the background.)
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the time-nuts