robert8rpi at yahoo.co.uk
Fri Jan 8 13:36:22 UTC 2010
On the original thread, I enquired who "refurbished" the LPRO's and what it included. Basically it's done by the seller and is a C field adjustment and lamp voltage check. Personally I'd call that "tested and adjusted as required". Refurbished implies to me that wear-out parts have been replaced. The NIST tracability is "the micro checks the GPS and LPRO and lights the LED" no reply on what type of GPS is fitted or if it goes into position hold. Buyer Beware! Trouble is less informed buyers may be taken in.
--- On Wed, 6/1/10, AL1 <alain2.bouchet at wanadoo.fr> wrote:
From: AL1 <alain2.bouchet at wanadoo.fr>
Subject: Re: [time-nuts] LPRO-GPSDO
To: "Discussion of precise time and frequency measurement" <time-nuts at febo.com>
Date: Wednesday, 6 January, 2010, 11:41
have a lok to :
very interesting for those who read french.
----- Original Message ----- From: <brucekareen at aol.com>
To: <time-nuts at febo.com>
Sent: Wednesday, January 06, 2010 4:18 AM
Subject: [time-nuts] LPRO-GPSDO
> In searching on-line for ways to construct a 10 MHz to 100 MHz multiplier,
> I came across an interesting product offered by Silicon Forest Solutions
> _http://www.TenMHz.com_ (http://www.TenMHz.com) . Their LPRO-GPSDO
> incorporates a refurbished LPRO rubidium oscillator, disciplined by a GPS receiver,
> for less than $500. It looks pretty clever and compact. Perhaps this
> product is offered by a member of this list who could tell us more about it.
> Bruce Hunter, KG6OJI
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts