[time-nuts] Heads Up to HP 5371A & 5372A Owners

[paul swed]

Thats good to know the same pods are used on the 54100d scope I believe. At
least its the same concept so the same failure mechanism may be at work.

On Fri, Jan 8, 2010 at 11:08 AM, Ed Palmer <ed_palmer at sasktel.net> wrote:

> I was recently having trouble with one of the 54002A input pods on my
> 5372A.  It was occasionally being recognized as a 54001A pod.  I took it
> apart and found that 7 of the 8 solder joints between the circuit board and
> the connector at the back of the pod were bad.  I checked my other pods and
> they all had at least one bad connection..  All the pods worked, but gave
> weird results when making low-level measurements.  After I resoldered them
> the strange readings disappeared.  Imagine that!  :-)
>
> Ed
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>