[time-nuts] Question about Firmware for EIP Counters
Bruce Lane
kyrrin at bluefeathertech.com
Tue Jan 12 18:09:01 UTC 2010
If you do happen to run across the image files for the EPROMs in
question, I would appreciate a copy of them for my FTP archive, so they
may be of help to others.
Thanks.
*********** REPLY SEPARATOR ***********
On 12-Jan-10 at 12:54 brucekareen at aol.com wrote:
>Is anyone on the list familiar with the firmware for EIP 578 or 548
>series
>counters? I have a favorite 578 counter, with power measuring option,
>that I have owned for years. All of this time I have wished it had the
>Frequency Extension option. Recently I bought a mechanically-damaged
578
>with
>the desired extended frequency range feature on eBay. I removed the
>optional
>RF parts and added them to my old counter. I also transferred the
>associated firmware PROM (U20) to my counter's A-105 microprocessor
>board, and
>added the jumper required to activate the feature on a second board.
But
>the
>option failed to work. By pressing buttons I determined the cause was
a
>firmware rather than RF problem.
>
>While my old firmware set of 5 PROMS was Version-B, the "parts" counter
>had Version-D PROMS, even though it was not far removed in serial
number
>and
>bore the same CCN code. So I transferred the remaining Version-D PROMS
>to
>my counter and presto! the frequency extension option worked great!
>However, before I could celebrate by closing the case, I realize the
>prized power
>measurement feature no longer worked. I tried interchanging the first
>then last PROMs in the programming sequence, but this just caused the
>microprocessor to lock-up. I am left with the feeling that the various
>firmware
>versions might correspond to the eight permutations of the three
options
>requiring microprocessor intervention (A to D Converter, Power Meter, &
>Frequency Extension). If this is the case, my augmentation project
seems
>doomed
>unless I can obtain a copy of the appropriate firmware. Has any list
>member
>had experience adding options to the EIP counters of this family? I
>have
>already asked this question on the Microwave Reflector, but with no
>responses.
>
>Bruce Hunter, KG6OJI
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to
>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.
>
>__________ Information from ESET Smart Security, version of virus
>signature database 4765 (20100112) __________
>
>The message was checked by ESET Smart Security.
>
>http://www.eset.com
Bruce Lane, Owner & Head Hardware Heavy,
Blue Feather Technologies (http://www.bluefeathertech.com)
Assoc. member, AZA & AAZK for many moons.
"Salvadore Dali's computer has surreal ports..."
More information about the time-nuts
mailing list