[time-nuts] Thunderbolt test results
Bob Camp
lists at rtty.us
Fri Jun 11 14:24:33 UTC 2010
Hi
Ok, then the TBolt is running 100 to 200 ns for a tau of 12 seconds to 280K seconds.
Without looking at the raw data it's tough to see what's going on. The numbers are 5 to 10X worse than I would have expected them to be.
One of the monitor programs (like Lady Heather) might be useful in diagnosing any issues you may have.
Bob
On Jun 11, 2010, at 9:29 AM, Peter Vince wrote:
> HI Bob,
>
> 10 nanoseconds at the bottom, up to 10 microseconds at the top,
> in three logarithmic sections.
>
> Donal: Is the time-constant at its default of 100 seconds, and was the
> above plot taken shortly after turning it on? There has been lots of
> talk on here about tweaking the performance. Increasing the
> time-constant to between 500 and 1000 seconds should help, as will
> stabilising the environmental temperature. Let it run for a few
> weeks, and the oscillator will settle down, and you should get some
> better results.
>
> TTFN,
>
> Peter
>
>
> On 11 June 2010 14:20, Bob Camp <lists at rtty.us> wrote:
>> Hi
>>
>> The vertical axis on the plot is pretty tough to read. What is the scale?
>>
>> Bob
>>
>> On Jun 11, 2010, at 8:43 AM, Donal G wrote:
>>
>>> Hi Guys,
>>>
>>> I bought a Thunderbolt device recently. I have done some
>>> 10Mhz frequency tests in comparison to a Cesium reference.
>>> Attached is MTIE plot. Have any of you done similar tests? any comment on
>>> my results?, is this normal operation when locked to the GPS? I was
>>> expecting better results that this!
>>>
>>> Thanks
>>> Donal
>>> <TBOLT -MTIE-small.JPG>_______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>> ______________________________________________________________________
>> This email has been scanned by the MessageLabs Email Security System.
>> For more information please visit http://www.messagelabs.com/email
>> ______________________________________________________________________
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the time-nuts
mailing list