[time-nuts] (no subject)

[Robert Benward]

Steve,
I was looking for insight.  For instance, is there a power up sequence for 
the +5 & +12V?  Anything I can look at before I dive in to the can?

This is not the first HP oscillator I have that has gone dead on me.  I have 
a 10811 that went south on me a few years back.  This is just getting 
expensive to replace them when they go bad.

And yes, if there is someone out there that can do it, I would consider 
sending it out for repair.  I'm an electrical engineer, but I also know my 
limitations, and although it would grate at me to send it out for repair, it 
would be the right thing to do (if the price is right)

Bob


  ----- Original Message ----- 
  From: Steve Rooke
  To: Discussion of precise time and frequency measurement
  Sent: Sunday, June 20, 2010 1:03 AM
  Subject: Re: [time-nuts] (no subject)


  Well, if your not prepared to open it up to fix it yourself, are you
  looking for someone else to fix it for you (your postings need
  clarifying)?

  Steve

  On 20 June 2010 16:23, Robert Benward <rbenward at verizon.net> wrote:
  > Adrian,
  > I have all this stuff. I really don't want to open this thing up, and my
  > oscillator trouble shooting skills are not that great.
  >
  > Bob
  >
  >
  > ----- Original Message -----
  > From: Adrian
  > To: Discussion of precise time and frequency measurement
  > Sent: Saturday, June 19, 2010 11:10 PM
  > Subject: Re: [time-nuts] (no subject)
  >
  >
  > Bob,
  >
  > guess you know that detailed documentaion is available here:
  > http://www.prc68.com/I/HPE1938.shtml
  > http://www.leapsecond.com/museum/e1938a/
  > Open the can and report back!
  >
  > Adrian
  >
  >
  > Robert Benward schrieb:
  > > All,
  > > Anybody out there know how to fix an E1938 oscillator? Something in 
the
  > > metal can has crapped out. No 10MHz, and in turn, no processor action.
  > It
  > > worked a few months ago, turn it on today, and worked after about an
  > hour.
  > > Turned it on again this evening and nothing. I would hate to take that
  > > crystal/heater assembly apart.
  > >
  > > Bob
  > > _______________________________________________
  > > time-nuts mailing list -- time-nuts at febo.com
  > > To unsubscribe, go to
  > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
  > > and follow the instructions there.
  > >
  > >
  >
  >
  > _______________________________________________
  > time-nuts mailing list -- time-nuts at febo.com
  > To unsubscribe, go to
  > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
  > and follow the instructions there.
  > _______________________________________________
  > time-nuts mailing list -- time-nuts at febo.com
  > To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
  > and follow the instructions there.
  >



  -- 
  Steve Rooke - ZL3TUV & G8KVD
  The only reason for time is so that everything doesn't happen at once.
  - Einstein

  _______________________________________________
  time-nuts mailing list -- time-nuts at febo.com
  To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
  and follow the instructions there.