[time-nuts] GPS antenna distribution from a DTV multi switch

Bob Camp lists at rtty.us
Mon May 10 11:30:10 UTC 2010


Hi

I'm sure that's high performance microwave certified hot glue (from Lowes) and not the common garden variety kind (from Home Depot).

Bob


On May 9, 2010, at 11:05 PM, Stanley Reynolds wrote:

> 
> 
> It works picture www.n4iqt.com/dtv4x8/5vreg-mod.JPG
> 
> The feed for 13v to the antenna was a ferite bead with 3 turns, it was attached to the board with orange hot glue. It connected to the 13v input to the ua78m06, for the mod I added a 7805 from the 18v lm317 to the bead rf choke.
> 
> Stanley
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 




More information about the time-nuts mailing list