[time-nuts] Z3805 utility, Was: AW: (no subject)

[Bob Camp]

Hi

The lower connector on the 3805 is the "command" port that appears to have the 422 / 232 option jumpers associated with it. 

The upper connector looks like it's only wired for RS-232 . It's connected to the lower board in the unit. What's it for?

Bob


On May 22, 2010, at 5:50 AM, Ulrich Bangert wrote:

> Bob,
> 
> everything you need for the Z3805 is included in my Z38XX utility, that has
> already been mentioned. This includes sending commands to the receiver, you
> do not need another terminal program. I own a Z3805 myself and basically I
> have written the software for myself. A Z3801 manual in conjunction with
> Z38XX should take you pretty far in either get it to run or otherwise
> diagnose a fault. 
> 
> Best regards
> Ulrich Bangert
> 
>> -----Ursprungliche Nachricht-----
>> Von: time-nuts-bounces at febo.com 
>> [mailto:time-nuts-bounces at febo.com] Im Auftrag von Robert Benward
>> Gesendet: Samstag, 22. Mai 2010 03:15
>> An: time-nuts at febo.com
>> Betreff: [time-nuts] (no subject)
>> 
>> 
>> Hi,
>> I just purchased a Z3805A at the Dayton hamfest this past 
>> weekend.  How do I 
>> get it to work?  Do I need software to run this, or can it 
>> run stand alone. 
>> I have turned it on, but only the power light comes on, the 
>> GPS lock, and 
>> more importantly, the enable light is not on.  There is an 
>> 10MHz output, but 
>> the holdover light is not on.  Is there any freeware available?  Any 
>> recommendations?
>> 
>> Any opinions on this one:
>> 
>> http://cgi.ebay.com/GPS-Receiver-Program-HP-Z3801A-Z3805A-Z381
> 6A-58540A-/250566043297?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3a56e666
> a1
> 
> Thank you in advance.
> 
> Bob
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>