[time-nuts] Discipline a rubidium driven net4501 with a Garmin LVC 18?
Richard W. Solomon
w1ksz at earthlink.net
Sat Oct 16 18:47:03 UTC 2010
Search ?? Where ?? Archives, Google, Evil Empire ...
73, Dick, W1KSZ
-----Original Message-----
>From: Hal Murray <hmurray at megapathdsl.net>
>Sent: Oct 15, 2010 8:15 PM
>To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
>Subject: Re: [time-nuts] Discipline a rubidium driven net4501 with a Garmin LVC 18?
>
>
>> Search for RUBIDIUM and you will also find a guy selling a divider card that
>> takes the LPRO output and generates several clocks, including 1 Hz...
>> cheaper and more versatile than the FATPPS
>
>A 1 Hz clock derived from a rubidium isn't synchronized to UTC second ticks.
>
>The PPS pulse out of a TBolt is only 10 microseconds wide. Some
>hardware/software won't see that. The FATPPS makes that wide enough to work
>with most setups. I used a diode + R + C kludge. It fits inside the TBolt.
>
>
>--
>These are my opinions, not necessarily my employer's. I hate spam.
>
>
>
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.
More information about the time-nuts
mailing list