[time-nuts] Tbolt Temp Sensor
Peter Loron
peterl at standingwave.org
Sun Apr 24 10:47:56 UTC 2011
If you are in need of a replacement DS1620C, I have many available. Please contact me off list. Thanks.
-Pete
On Apr 23, 2011, at 6:29 PM, Arthur Dent wrote:
> "One of these units appears to have an onboard temp
> sensor that is dead - the temp just reads -55.0C all the
> time. This is the little Maxim/DallasDS1620 chip, which
> I can replace, but I had a few questions first."
> ++++++++++++++++++++++++
>
> I've had about 50 Thunderbolts and at least 5 of them had
> a defective DS1620 chip. About 3 more were from late
> 2004 or early 2005 and had the "E" revision chip that
> displays the temp in about 3/4 degree steps. Of the ones
> that failed the common failure mode was to display
> -54.999 degree C even though I'm sure it wasn't quite
> that cold in my shop. ;-)
>
> If you replace the chip just make sure that the replacement
> chip is a "D" or "C" revision if you want the Lady Heather
> graph to look nice.
>
> -Arthur
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list