[time-nuts] LCD display connector
gary
lists at lazygranch.com
Mon Jan 3 20:40:21 UTC 2011
You need to clean the elastomer. I've done this with Caig deoxit, though
I would search their website to see if they have a special product for
the task.
http://store.caig.com/
Generally the LCD is just pressed against the elastomer, so you may need
to see that the pressure is sufficient.
On 1/3/2011 12:34 PM, Jim Palfreyman wrote:
> Apologies for being a teensy tiny bit OT. But is relevant on the whole.
>
> I have a remote control for an air conditioner whos display is only
> partially working.
>
> Upon internal inspection it seems the sticky thingy (technical term)
> connecting the LCD display to the board is not attached properly.
>
> Any hints on how to reattach these?
>
> Jim Palfreyman
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the time-nuts
mailing list