[time-nuts] LH v3.0 Beta and Z3816A Question

[paul swed]

A quick question
I thought lady heather was a Tbolt program only.
Does it work with other GPSDP like the hp 3801 etc???
Thanks

On Tue, Jan 18, 2011 at 9:20 AM, J. L. Trantham <jltran at att.net> wrote:

> The Z3816A responded to the command nicely.  I was also able to use the
> command:
>        *tst?
> to reboot the receiver without having to turn off the Z3816A.  This was
> using Symmetricom SatStat v5.0.  I have not tried with HP SatStat v4.2.
>
> Initially, the time was off by what appeared to be the leap second value
> with a TFOM of 6.  Now it is back to a TFOM of 3 and the time appears
> correct.
>
> Thanks,
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
> Behalf Of J. L. Trantham
> Sent: Tuesday, January 18, 2011 6:36 AM
> To: 'Discussion of precise time and frequency measurement'
> Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question
>
>
> Michael,
>
> Thanks for the hint.  I've looked at that site a thousand times but never
> found that hint until now.  I'll give it a try.
>
> Thanks again.
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of cook michael
> Sent: Tuesday, January 18, 2011 2:20 AM
> To: time-nuts at febo.com
> Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question
>
>
> Le 18/01/2011 05:07, J. L. Trantham a écrit :
> > An unrelated question.  My Z3816A reports GPS time.  I have looked but
> > have not found a command to make it switch to UTC.  Does such a
> > command exist? If so, what is it?
> >
> The command to do the same on the Z3801A might work with this box aswell.
>
> Using info from K8CU;
> http://www.realhamradio.com/GPS_Frequency_Standard.htm
>
> Issue the command:
>
>    :diag:gps:utc?
>
> If it returns 0 you are in GPS mode; if 1 you are in UTC
>
> Use the command:
>
>    :diag:gps:utc 1
>
> followed by
>
>        :syst:pon
>
> to set it to UTC mode.  Some units have to be powered off to actually reset
> to UTC depending on software version.
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.872 / Virus Database: 271.1.1/3386 - Release Date: 01/17/11
> 01:34:00
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>