[time-nuts] What's the best way to double 10 MHz to 20 MHz ?

Mark Spencer mspencer12345 at yahoo.ca
Fri May 27 16:10:51 UTC 2011


Imho phase noise is probably as important as long term stability in this application.

On Fri May 27th, 2011 10:51 AM EDT David Kirkby wrote:

>On 27 May 2011 15:21, Bob Camp <lists at rtty.us> wrote:
>> Hi
>>
>> You also may want to avoid an oscillator with much 10 MHz content in it. All sorts of odd things can happen with spurs when you have unplanned stuff on the main reference. Another thing to look closely at is - how much of the radio tracks the reference? On some radios, they don't really lock everything up. You get better performance, but not quite what you would expect.
>>
>> Bob
>
>Yes, a band-pass filter would seem sensible here.
>
>To the best of my knowledge, everything is locked to this 20 MHz, so
>there should be a significant improvement.
>
>However, I must admit as to wondering whether its worth the bother. I
>have a Yaesu FT-ONE, which is a pretty poor design, despite it was the
>top of the line Yaesu transceiver in its day (~1982) costing $3000. It
>has a synthesizer for 100 Hz steps and then uses a varicap diode to
>get the 10 Hz steps! This is not very stable, but in practice is
>stable enough. There's nothing much one can do about that - perhaps
>keeping the temperature constant in the vicinity of the varicap and
>other critical components would help. But it also suffers from the use
>of more than one reference, so hard to really stabilise.
>
>The Kenwood TS-940SAT should be a lot more stable anyway. The Kenwood
>actually seems a lot better technically to me, despite it costs only
>$2000 and was released about the same time as the Yause FT-ONE. The
>Kenwood TS-940S has a built in ATU (not even an option on the Yaesu
>FT-ONE), FM (optional on the Yaesu FT-ONE), TCXO (not even optional on
>the Yaesu).
>
>
>I might however look at using a TCXO o OCXO in the Kenwood.
>
>Dave
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.




More information about the time-nuts mailing list