[time-nuts] GPIB Card locks up motherboard
Azelio Boriani
azelio.boriani at screen.it
Mon Nov 14 20:38:59 UTC 2011
Why not a PCI one... yes, it is $100 and an AT card is $40 but maybe a PCI
one has no (or much less) compatibility issues. Is the BX6 mobo working
with other AT-type cards? Can you test with any other AT card?
On Mon, Nov 14, 2011 at 8:56 PM, Chuck Forsberg WA7KGX N2469R
<caf at omen.com>wrote:
> Thanks to the kind help from the list I now have my Racal-Dana 1992
> sending readings to a National Instruments GPIB PCII/PCIIa board
> in PCIIa mode default settings. This is with an Abit BH6 mobo with a
> 300 MHz PIII. That is not the fastest gun in the west.
>
> If I plug the GPIB card into a BX6 running at 800 MHz that board stops
> working.
> It won't even display its start up screen. I've tried random different
> switch
> settings on the GPIB card to no avail.
>
> Any suggestions? Do I need to get a GPIB card with a 16 bit AT connector?
>
> --
> Chuck Forsberg WA7KGX N2469R caf at omen.com www.omen.com
> Developer of Industrial ZMODEM(Tm) for Embedded Applications
> Omen Technology Inc "The High Reliability Software"
> 10255 NW Old Cornelius Pass Portland OR 97231 503-614-0430
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the time-nuts
mailing list