[time-nuts] Low noise power supplies for time nuts circuitry
lists at lazygranch.com
lists at lazygranch.com
Tue Nov 22 22:38:18 UTC 2011
Yes, load isolation is a valuable feature I left out. Perhaps the key feature. The audio designers like it for channel separation.
------Original Message------
From: ed breya
Sender: time-nuts-bounces at febo.com
To: time-nuts at febo.com
ReplyTo: Discussion of precise time and frequency measurement
Subject: [time-nuts] Low noise power supplies for time nuts circuitry
Sent: Nov 22, 2011 2:17 PM
The shunt regulator also serves to isolate load current fluctuations
from the main supply, since it makes it appear as a constant
resistance, current, or power load, depending on the design. This can
eliminate cross-talk between various circuitry.
For example, I just made one for my new 5065A LED clock design. It
makes 4 V for the display, and is able to absorb the nasty 90 mA to
250 mA local range caused by the LED numeric and scan load, but the
steps are virtually invisible to the +5 V supply - it looks like
about a 4 ohm resistive load into about 4 V source.
Ed
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list