[time-nuts] Neutrino timing

shalimr9 at gmail.com shalimr9 at gmail.com
Tue Oct 25 12:16:51 UTC 2011

Unless it took hours for the light to come out of the star compared to the neutrinos, being at a great distance tends to make the flight time the dominant factor and swamp out small differences due to peculiarities at the point of emission.

Didier KO4BB

Sent from my BlackBerry Wireless thingy while I do other things...

-----Original Message-----
From: "Tom Van Baak" <tvb at LeapSecond.com>
Sender: time-nuts-bounces at febo.com
Date: Mon, 24 Oct 2011 21:38:54 
To: Discussion of precise time and frequency measurement<time-nuts at febo.com>
Reply-To: Tom Van Baak <tvb at leapsecond.com>,
	Discussion of precise time and frequency measurement
	<time-nuts at febo.com>
Subject: Re: [time-nuts] Neutrino timing

> Think big.  The experiment has been done over 168,000 light years.
>  http://en.wikipedia.org/wiki/Supernova_1987A
> The neutrinos got here 3 hours before the light.  (Empty space isn't really 
> empty.  The dielectric constant slows the light down a tiny tiny bit.)


Ah, you're assuming the neutrinos came out of the supernova at
the same time as the light. I've read that this is not the case. By
their nature neutrinos can make it out of that explosion immediately
but it takes a while for the light or other particles to migrate their
way out from the core. In which case you would expect to see
the neutrinos first.

This applies to time interval measurement too. The best way to
measure interval is use two equivalent detectors; one near and
one far, but both away from the source. That way you get two
fair in-flight measurements. Using some implied internal trigger
and just one far detector may give misleading results.


time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

More information about the time-nuts mailing list