[time-nuts] Antique Rb Standard - Thanks, Pictures, Parts Request, Question
Robert LaJeunesse
rlajeunesse at sbcglobal.net
Sat Apr 28 20:33:19 UTC 2012
Ed, nice pix, thanks.
Looking at the Elko Varicon I have in hand (DXX455-1000-3) the contacts are
essentially hermaphroditic. This chassis mount housing gives up its contacts
fairly easily, just unbend a tab to release. Turn them 90 degrees and you have
something that works like the mating PCB side contact. Only part requiring
effort would be to trim / mount / hold them in line somehow.
I'd offer up mine (no big deal, I have more) but I suspect it's the smaller
contact - dual row 0.1" centers vertical, 0.2" centers horizontal, rows offset
0.1". If you think it might be workable let me know.
Bob L.
________________________________
From: Ed Palmer <ed_palmer at sasktel.net>
To: Time-Nuts <time-nuts at febo.com>
Sent: Sat, April 28, 2012 2:44:06 PM
Subject: [time-nuts] Antique Rb Standard - Thanks, Pictures, Parts Request,
Question
Third, I'd like to build an extender board, but I can't find the connectors.
The contacts are called Varicon and are used both on circuit boards and in
connectors. The connector version is available, but I can't find the board
version. The last picture in the above gallery shows a close-up of the
connectors. They were available in regular and mini versions. I need the
regular ones that stand about 4.3 mm high. The minis are about 3.5 mm high and
won't mate with the regular ones. New ones could be loose or spaced out on a
plastic strip to make installation easier.
More information about the time-nuts
mailing list