[time-nuts] : L1 GPS timing signal(s) into local time on computer(s)

Michael Tharp gxti at partiallystapled.com
Tue Aug 21 12:46:34 EDT 2012


On 08/21/2012 12:35 PM, Sarah White wrote:
> Thanks Chris.
>
> I always appreciate clear explanations. I'm assuming that the "fixed
> location" requirement is important to note for purposes of compensating
> for any dopler shift, as well as the distance the signal must first
> travel before being decoded.
>
> ... I would presume that the fixed location used for above calculations
> would be relative to the position of the antenna? I read somewhere that
> even compensating for the length of the antenna cabling is important?

Yes, the antenna location is what's being measured. You will want to 
compensate for cable delay but this is simply a matter of subtracting 
however many nanoseconds it takes the signal to flow through the cable. 
It does not directly affect the process of doing fixes (whether for 
position or for time) because the pulses from all of the satellites flow 
in parallel once they're inside the cable.




More information about the time-nuts mailing list