[time-nuts] T-Bolt Temperature

Ron Ward n6idlron at comcast.net
Wed Aug 22 23:41:01 EDT 2012


Hi:
Thanks for your quick response to my questions.

I read here that there was information on controlling Thunderbolt's
temperature using the thunderbolt as a PID temperature controller. Would a
constant temperature for the thunderbolt produce a significant improvement
in performance?

I don't know how to search the Time-Nut archive for specific information.

Thanks for all of the information and help!
Ron

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Azelio Boriani
Sent: Wednesday, August 22, 2012 1:21 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] T-Bolt Temperature

Yes, ambient/board temperature, not the OCXO oven temperature.

On Wed, Aug 22, 2012 at 8:12 PM, Arthur Dent
<golgarfrincham at yahoo.com>wrote:

> >Hi:
> >What is the temp chip reading? Is it reading the oven temperature or just
> >the ambient temperature?
> >Ron
> >
>
> The DS1620 thermometer chip is in the corner of the pc board next to the
> RS232 connector and diagonally opposite the OXCO so it reads ambient
> temperature.
>
> -Arthur
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.






More information about the time-nuts mailing list