[time-nuts] HP 58503A

[Azelio Boriani]

OK, so a digital 'scope is needed or, at least, with memory.

On Thu, Aug 2, 2012 at 1:12 PM, Peter Bell <bell.peter at gmail.com> wrote:

> My guess is that it's a PP2S / "Even Second" output - that would also match
> with the label...
>
> On Thu, Aug 2, 2012 at 5:02 PM, Azelio Boriani <azelio.boriani at screen.it
> >wrote:
>
> > OK, it is in the place of the PPS output... can you hook an oscilloscope
> > and see if there is any output?
> >
> > On Thu, Aug 2, 2012 at 10:25 AM, Christoph Kopetzky <dekagoon at gmail.com
> > >wrote:
> >
> > > Azelio Boriani <azelio.boriani at ...> writes:
> > >
> > > >
> > > > Why are you assuming this is a protocol or signal label? Maybe a
> > > > maintenance or repair-by-exchange indication too.
> > > >
> > >
> > >
> > > Because the label is above the bnc connector on the back side of the
> > 58503A
> > > beside the bnc connector with an alarm label.
> > > The 58503A has the single option H14. May be this is a special output
> > > protocol
> > > on this connector like the IRIG protocol...
> > >
> > > Any ideas?
> > >
> > > Chris
> > >
> > >
> > >
> > > _______________________________________________
> > > time-nuts mailing list -- time-nuts at febo.com
> > > To unsubscribe, go to
> > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > > and follow the instructions there.
> > >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>