[time-nuts] Need usb time interval time for portable bullet chrongraph
Tom Van Baak (lab)
tvb at leapsecond.com
Mon Aug 27 04:06:10 UTC 2012
Hi Paul,
See http://leapsecond.com/pic/picpet.htm and contact me offline for the USB part.
What do you use for sensors: acoustic, optical, seismic?
/tvb (iPhone4)
On Aug 26, 2012, at 10:48 PM, Paul Cianciolo <paulc at snet.net> wrote:
> Hello Folks
>
> I have been looking at bullet chrographs and wondering if I could get the a usb module to do a interval measurement and display on my laptop.
> on a yet to be discovered module to calculate the time interval between the pulses?
>
> The bullet travels at approx 1050 feet per second.
> By spacing my gates providing the start stop pulses precisely 1 foot apart I think a direct read out except for the decibal point being in the wrong place .
>
> Does this seem fesable?
>
> Here is one module I found http://www.weedtech.com/index_eventcount.html
>
> Any thoughts on this?
> The reason for the USB would be for display on my laptop at the firing range
>
> Thank you for any help I would really appreciate it
>
> PaulC
> W1VLF
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list