[time-nuts] MT3339 PA6H and Racal Dana GPIB, update

Fabio Eboli FabioEb at quipo.it
Thu Dec 13 00:25:59 UTC 2012

Thanks Bob, the next logging session will
be setup as per your suggestion.

Now I'm logging with the counter
in time interval, Rb 1 is the start,
GPS is the stop and Rb2 is the ext
reference. The pulses are 670mS apart now.


Bob Camp <lists at rtty.us> ha scritto:

> Hi
> Yes, I would run the FE5680 into the counter's frequency standard input.

> For the "real data", you can set up the counter to start on the GPS pps and
> stop on the 10 MHz output from the FE5680. You will only have 100 ns of
> range. You can unscramble the data after the fact. If you don't want to
> unscramble things, divide the 10 MHz down to 100 Hz and put that into the
> stop channel.
> Lots of fun.
> Bob

This message was sent using IMP, the Internet Messaging Program.

More information about the time-nuts mailing list