[time-nuts] FE-5680A firmware dump
iteration69 at gmail.com
Mon Feb 6 20:50:06 UTC 2012
I've been considering ripping the firmware from the mcu as well. I've not
got beyond the consideration stages, but i have all the equipment here at
work. When you say that the read option is not available. is this because
the chip has protection fuses enabled?
Also, what programmer do you have, Here at work I have a galep-5 which
AFAIK can read both the mcu and cpld/fgpa/pga, whatever it is (provided
they are not locked, or the state machine encrypted)
On Mon, Feb 6, 2012 at 10:07 AM, Elio Corbolante <eliocor at gmail.com> wrote:
> Unfortunately my programmer is only able to erase/program/verify the PSD
> chip. The "read" option is not available! :-(
> To dump the firmware I need to desolder the chip and prepare a dedicated
> "testbed": before doing this on a working FE-5680A, is there anyone of you
> who want to sell me a *nonworking* unit (better if it is a nonlocking one)?
> _ Elio.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the time-nuts