[time-nuts] FE-5680A dumb question...

[Chris Albertson]

The manual is for a similar unit with the same part number.  On this unit

(I was going to be sarcastic and say "Its the pin with the 10MHz sine wave
on it" but here it the pinout.
I get about 2V peak to peak when loaded with a 10X scope probe only

1 +15V
2 return for #1
3 lock.unlock
4 +5V
5 gnd
6 N/C (but I see a tiny ~60MHz sine-like wave
7 10MHZ output
8 rs232 Rx
9 rs232 Tx

On Tue, Jan 3, 2012 at 5:58 PM, Brian, WA1ZMS <wa1zms at att.net> wrote:

> My E-bay FE-5680A finally arrived. (4weeks later)
>
>
>
> Of the pins on the DB-9 connector, which one is the RF output?
>
> The manual only talks about an SMA output.
>
>
>
> I know this has been talked about before, but I cannot find the thread.
>
>
>
> Thanks in advance & sorry for bandwidth,
>
> -Brian, WA1ZMS
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



-- 

Chris Albertson
Redondo Beach, California