[time-nuts] Getting my Rockwell D200 GPS to work
Don Lewis
dlewis6767 at austin.rr.com
Sat Jan 7 00:44:16 UTC 2012
Thank you, ...Azelio,
....I hooked them up, using this site.
Maybe they are all bad. ....hope not.
-Don
-----------------------------------------------------------
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Azelio Boriani
Sent: Friday, January 06, 2012 6:30 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Getting my Rockwell D200 GPS to work
Try this: http://ke6mto.files.wordpress.com/2010/07/gps2a.pdf
but forst here: http://www.weirdstuff.com/cgi-bin/item/20164
On Sat, Jan 7, 2012 at 1:24 AM, Don Lewis <dlewis6767 at austin.rr.com> wrote:
> Can someone please give me some pointers (my first time with a GPS
module).
>
>
>
> A little hand-holding, pls.
>
>
>
> I bought three of these Rockwell D200 GPS receivers. (It's little GPS PWB
> with an antenna connector and pins for connecting to the RS232- PC)
>
>
>
> All three 'appear' to work the same way (no apparent capture of
> satellites).
>
>
>
> Here's what I have:
>
>
>
> 1. VisualGPS installed and running.
> 2. A small USB-RS232 card installed and appears to be operational.
> 3. Small GPS active antenna plugged in.
> 4. VisualGPS monitor just repeatedly displays:
> $GPGGA,,,,,,0,00,,,,,,,*66
> 5. I think I understand this to be NMEA code to mean no satellites
> have
> been acquired.
> 6. The Rockwell D200 draws ~180ma (5V) with no antenna and ~190ma
with
> the small active antenna plugged in.
>
>
>
> What am I doing wrong? Other than maybe cheap china gps' and antenna???
> But it is what I could afford and thought it would be cheap to learn on.
>
>
>
> Thanks for your help.
>
>
>
> -Don
>
>
>
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list