[time-nuts] FE-5680A what is the size of the Torx??
Brian, WA1ZMS
wa1zms at att.net
Wed Jan 18 00:31:00 UTC 2012
I used a T7 bit for mine.
-Brian, WA1ZMS
On Jan 17, 2012, at 6:24 PM, "Paul F. Sehorne" <paul at sehorne.org> wrote:
> Nope. Looked at them with a jeweler's loupe. They are Torx.
>
> On 1/17/2012 5:13 PM, Peter Gottlieb wrote:
>> Most likely they are 1/16" hex.
>>
>>
>> On 01/17/12, Chris Albertson<albertson.chris at gmail.com> wrote:
>>
>> No need to buy a tool. They drill out really easy but you can also
>> simply punch them out. There are no nuts on the back. The screws
>> bite directly into the fiberglass PCB. Mine were T-16 but many
>> people report they are hex not torx. Maybe it depends on what kind
>> of screw they had around the day it was built.
>> On Tue, Jan 17, 2012 at 2:42 PM, Paul F. Sehorne<[1]paul at sehorne.org>
>> wrote:
>> >
>> > I received my two FE-5680s today. The first thing I want to do is
>> inspect
>> > the insides. The smallest Torx I have is a too-big T-8. What size
>> is
>> > needed? I'll need to do an internet search for the correct size.
>> >
>> > Thanks,
>> > Paul
>> >
>> > _______________________________________________
>> > time-nuts mailing list -- [2]time-nuts at febo.com
>> > To unsubscribe, go to
>> > [3]https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> > and follow the instructions there.
>> --
>> Chris Albertson
>> Redondo Beach, California
>> _______________________________________________
>> time-nuts mailing list -- [4]time-nuts at febo.com
>> To unsubscribe, go to
>> [5]https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>> References
>>
>> 1. mailto:paul at sehorne.org
>> 2. mailto:time-nuts at febo.com
>> 3. https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> 4. mailto:time-nuts at febo.com
>> 5. https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list