[time-nuts] Thunderbolt cabling questions

EWKehren at aol.com EWKehren at aol.com
Mon Jun 11 15:45:35 EDT 2012


I know I repeat my self. I have done so far four sewer vents using a 4 way  
PVC splitter, sanding the side stubs down and glue a white GPS antenna 
flush on  the top. 4 way so air comes in or out on the sidesRun the coax down 
the inside  of the pipe, fish it out at the best location, seal the hole and 
from the  outside it does not attract any attention. If you can not find a 4 
way use a  coupling and with circular saw drill some holes into the side for 
venting.
Bert Kehren
 
 
In a message dated 6/11/2012 11:52:00 A.M. Eastern Daylight Time,  
albertson.chris at gmail.com writes:

On Mon,  Jun 11, 2012 at 3:28 AM, Bob Camp <lists at rtty.us> wrote:

>  Hi
>
> I was concerned about the appearance before I did the first  one. After
> putting several up, they all look pretty good. The mast  portion looks
> straight from the ground and it's actually smaller than  any conventional
> mast. The black paint does indeed help out a little  in hiding the tee 
it's
> self.


I've tried camouflaging the  masts.  Paint the upper parts sky blue with
puffs of white spray paint  over the blue I paint the bottom part black or
dark green.    Not  perfect, I have a 40 foot pole on the back yard fence
that is still visible  from the street but maybe it helps.   Battle ship
grey works well  too.

Chris Albertson
Redondo Beach,  California
_______________________________________________
time-nuts  mailing list -- time-nuts at febo.com
To unsubscribe, go to  
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the  instructions there.




More information about the time-nuts mailing list