[time-nuts] Z3801A Problem
Bob Camp
lists at rtty.us
Wed Nov 7 12:30:49 UTC 2012
Hi
There were a *lot* of firmware updates to the Oncores. I don't know if the re-flash images are still out there or not. If they are, it wouldn't hurt to upgrade the card. I don't think it will fix your problem, but it won't hurt either.
Bob
On Nov 7, 2012, at 1:06 AM, Ed Palmer <ed_palmer at sasktel.net> wrote:
> Hi Mike,
>
> My unit has the standard 6 channel VP. In fact, here's the ID message:
>
> COPYRIGHT 1991-1995 MOTOROLA INC.
> SFTW P/N # 98-P39972M
> SOFTWARE VER # 8
> SOFTWARE REV # 4
> SOFTWARE DATE 13 JUL 1995
> MODEL # B1121P1114
> HDWR P/N # _
> SERIAL # SSG0239632
> MANUFACTUR DATE 7H18
> OPTIONS LIST IB
>
> I understand that the 'B1' start to the model number means that it's quite old.
>
> I don't remember if I ever did a full reset so I just did one. We'll see what happens.
>
> Thanks,
> Ed
>
> On 11/6/2012 10:20 PM, Mike S wrote:
>> On 11/6/2012 2:59 PM, Ed Palmer wrote:
>>> But if this is a firmware issue, shouldn't there be lots of Z3801As with
>>> this problem? I suspect that there's a fault with my unit, but I can't
>>> imagine what.
>>
>> Does your unit by chance have an 8 channel Oncore VP instead of the stock 6 channel one?
>>
>> Also, have you tried a full reset (:system:preset)?
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list