[time-nuts] 5061A AC Power connector

Peter Bell bell.peter at gmail.com
Sun Nov 25 04:07:28 UTC 2012


If you are going to be filing them, then you should wear a face mask - the
base plating on those things (even now) is normally Cadmium.   What you
actually want is a MS3106A18-22SW, but it looks like that vendor only
supplies connectors with the default polarization.



On Sun, Nov 25, 2012 at 10:48 AM, J. L. Trantham <jltran at att.net> wrote:

> Forgot to mention, when you get the DMS3106A18-22S, you'll have to unscrew
> the back, remove the connector insert, file out a small 'key' in the
> material, and rotate the insert to achieve the desired alignment to mate
> with the connector on the 5061A or the 5065A.  The alignment is the same on
> both but the wiring might be different.
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of J. L. Trantham
> Sent: Saturday, November 24, 2012 8:36 PM
> To: 'Discussion of precise time and frequency measurement'
> Subject: Re: [time-nuts] 5061A AC Power connector
>
>
> Pete,
>
> In the US, Galco sells a DDK product that works well.  The connector and
> shell are a DMS3106A18-22S.
>
> http://www.galco.com/buy/DDK/DMS3106A18-22S
>
> You will also need a clamp and strain relief.  I use a DMS3057-10A.
>
> http://www.galco.com/buy/DDK/DMS3057-10A
>
> It is the same connector as a 5065A though you have to be careful about the
> wiring.  Some of the 5065A's are the same as the 5061A and others are
> different.
>
> Hope this helps.
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Pete Lancashire
> Sent: Saturday, November 24, 2012 6:51 PM
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] 5061A AC Power connector
>
> What is the MS type for the power plug for a 5061A ?
>
> I could not find it in the PDF I have.
>
> -pete
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list