[time-nuts] Best counter setting for ADEV?

Azelio Boriani azelio.boriani at screen.it
Thu Oct 4 16:26:53 UTC 2012


Yes, for a theoretical resolution of 10E-14 at 100K sec start with a 1nS and
average for 100K seconds but ending up with a noise (an error bar) of 3E-12.

On Thu, Oct 4, 2012 at 4:25 PM, Bob Camp <lists at rtty.us> wrote:

> Hi
>
> For a *resolution* of 1.0 x 10^-14 at 1.0 x 10^5 seconds I only need a 1.0
> x
> 10^-9 second reading out of the counter. Indeed, 5 or 10X more than that
> would be better if I was after a 1 x 10^-14 accuracy.
>
> Bob
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Azelio Boriani
> Sent: Thursday, October 04, 2012 7:58 AM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Best counter setting for ADEV?
>
> Taking 10 samples from a 1nS counter leads you to a 100pS resolution but
> the noise at best (if it is really random) is reduced by SQRT(10). So, as
> already pointed out here, there is no real substitute for lower noise,
> higher resolution measurements.
>
> On Thu, Oct 4, 2012 at 3:01 AM, Bob Camp <lists at rtty.us> wrote:
>
> > Hi
> >
> > A 1 ns resolution TI counter will do the measuring part just fine.
> Hitting
> > the number, is where it gets a bit crazy. A *good* GPSDO might get near
> > that.
> >
> > Bob
> >
> > On Oct 3, 2012, at 8:56 PM, Kevin Rosenberg <kevin at rosenberg.net> wrote:
> >
> > > On Oct 3, 2012, at 6:52 PM, Kevin Rosenberg <kevin at rosenberg.net>
> wrote:
> > >> Nice plot! Yes, I'd have trouble measuring 10E-14 at 10E5 seconds.
> > >
> > > Sorry, 1E-14 at 1E5.
> > >
> > >
> > > _______________________________________________
> > > time-nuts mailing list -- time-nuts at febo.com
> > > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > > and follow the instructions there.
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list