[time-nuts] Reading data from Thunderbolt using an Arduino

[Didier Juges]

Of course, you are welcome to use any part or all of it. Software is free and the hardware cost almost negligible. If you don't do C, that would be an excellent way to get started with something simple and that works and that does something you need.

Didier

Sent from my Droid Razr 4G LTE wireless tracker.



-----Original Message-----
From: Russ Ramirez <russ.ramirez at gmail.com>
To: time-nuts at febo.com
Sent: Fri, 05 Apr 2013 3:29 PM
Subject: Re: [time-nuts] Reading data from Thunderbolt using an Arduino

Thanks Didier, I have been to your site before, but somehow missed this
project.



> Russ,
> Check the source code on my GPSMonitor project. It will give you an
> example how to decode the Trimble data.
>
> WWW.ko4bb.com
>
> Didier
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.