[time-nuts] HP-8640B

Azelio Boriani azelio.boriani at screen.it
Thu Apr 25 07:37:42 EDT 2013


Try this page:
http://www.jvgavila.com/hp8640b.htm
maybe the problem described is exactly what you are experiencing on yours.


On Thu, Apr 25, 2013 at 11:25 AM, Alf Pousar <alf.pousar at surffi.net> wrote:

> Hello Folks!
>
> I turn to you in hope someone can help me.
> The old but good signal generator 8640B is by Agilent declared obsolete
> and no support available.
> The frequency counter in the last production versions, has a Pre-Scaler
> P/N 08640-60306 quite different from the "old" one 08640-60168.
> The old version have 5 IC's, the new has 6 IC's, 2x 1820-0982, 1x
> 1820-0736 and the scaler 1820-1003, all four are EECL.
> Two remainig are ECL  1820-0145 and 1820-0817.
>
> I need a schematic diagram for this board. Any help on this matter is much
> appreciated.
>
> Thank you,
>
> Alf Pousar
> OH2QM
> alf.pousar at surffi.net
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list