[time-nuts] 9390-55108 IRIG

[Mark C. Stephens]

That one is about  10 years younger than this one :)
I don't know why they called everything 9390, when the difference between generations is substantial.
Probably a marketing decision..


-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On Behalf Of GandalfG8 at aol.com
Sent: Friday, 9 August 2013 9:46 PM
To: time-nuts at febo.com
Subject: Re: [time-nuts] 9390-55108 IRIG

Didier has the 9390-6000 manual that has details of the IRIG ouputs for that, I wouldn't expect there to be too much difference, if any....
 
_http://www.ko4bb.com/manuals/index.php?dir=05%29_GPS_Timing/Datum_
(http://www.ko4bb.com/manuals/index.php?dir=05)_GPS_Timing/Datum) 
 
Regards
 
Nigel
GM8PZR
 
 
In a message dated 09/08/2013 12:16:42 GMT Daylight Time, marks at non-stop.com.au writes:

I am  trying to get a Datum 9390-55108 to work with NTPD using refclock driver  6.
So far I have been unsuccessful.
The output looks like IRIG-B  (modulated 1Khz with 50% greater amplitude
pulses) I can't get it to work with  NTPD.
Unless of course, my NTPD version is broken!

Does anyone have  information on these old type of 9390 that suggests the IRIG standard they  output?


--marki
_______________________________________________
time-nuts  mailing list -- time-nuts at febo.com
To unsubscribe, go to  
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the  instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.