[time-nuts] ThunderBolt Display

[James Tucker]

Me, too.

Jimt

Sent from *my* galaxy (Nexus).
On Aug 15, 2013 1:07 PM, "Mike Feher" <mfeher at eozinc.com> wrote:

> I sent an email to Andy from the web site and never heard back from him. -
> Mike
>
> Mike B. Feher, EOZ Inc.
> 89 Arnold Blvd.
> Howell, NJ, 07731
> 732-886-5960 office
> 908-902-3831 cell
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Eric Garner
> Sent: Thursday, August 15, 2013 1:22 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] ThunderBolt Display
>
> Is anyone else having difficulty submitting a request for an order form?
>
>
> On Wed, Aug 14, 2013 at 10:36 AM, Chris Albertson <
> albertson.chris at gmail.com
> > wrote:
>
> > What was the problem you found.  Other then a "new to you" platform?
> > I'm trying to understand why reading serial data would be hard.
> >
> > An advantage of the Adruino is that you don't need to make a PCB.
> > Even if you want to do something like add a graphical display or and
> > SD card for logging they just plug in, no solder required.
> >
> > Of course the pre-buillt display is even easier but can't be modified.
> >
> > One of my loner term goals is to move lady heather like functions onto
> > a small uP based device.  It seems wasteful to use a PC for this.
> >
> >
> > On Wed, Aug 14, 2013 at 10:16 AM, Russ Ramirez <russ.ramirez at gmail.com
> > >wrote:
> >
> > > Yeah, after trying to (reliably) get the time out of the pertinent
> > > TSIP message using an Arduino UNO, I can understand your statement
> > > Adam about the Arduino approach. It kinda works, but it felt like I
> > > was fighting the implementation of the controller card and that I
> > > should cut-over to my
> > own
> > > solution using an Atmel, PIC or TI chip that I could just load C
> > > code
> > into.
> > > One of this lists members gave me the code I needed, so ironically
> > > using the UNO made the project more difficult.
> > >
> > > Russ
> > > K0WFS
> > > _______________________________________________
> > > time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > > and follow the instructions there.
> > >
> >
> >
> >
> > --
> >
> > Chris Albertson
> > Redondo Beach, California
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
>
>
>
> --
> --Eric
> _________________________________________
> Eric Garner
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>