[time-nuts] More pictures of the mystery Collins Ru

George Dubovsky n4ua.va at gmail.com
Sun Jul 28 07:01:02 EDT 2013

Well, the outside label does claim it was made by GENRAD... ;-)


geo - n4ua

On Sat, Jul 27, 2013 at 9:24 PM, Pete Lancashire <pete at petelancashire.com>wrote:

> https://plus.google.com/u/0/photos/111617808980322733757/albums/5890266601277045697
> The board with the edge connector was inside the same bag the
> connector was in, the bag was taped to the unit.
> I pulled the ends off first, but was immediately stopped with foam, it is
> glued in place.
> Then when I finally got the lid with all the screws off, all there is, is
> one board covered in potting compound.
> The compound breaks away pretty easily. One can see where a couple parts
> were
> replaced and there soft RTV was used. There are two precision resistors in
> that area.
> The biggest surprise is the General Radio logo on the board !
> goo.gl/1XGG2F
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list