[time-nuts] GPDSO is working

Azelio Boriani azelio.boriani at screen.it
Fri Jul 12 04:50:48 EDT 2013


No, it doesn't depend on the timing mode. What reference are you
using? That is, your counter is using its internal reference or else.

On Fri, Jul 12, 2013 at 5:59 AM, Bob Stewart <bob at evoria.net> wrote:
> After ham-fistedly breaking a few things, I've finally got my GPSDO working. (does happy dance)  Now that it's had some time to warm up I see that it's started wandering around +/- a couple of counts from sample to sample (16 seconds).  Is this because the UT+ is not set to timing mode?  Putting in an RS-232 (or USB) to TTL adapter, switchable between the UT+ and the VE2ZAZ board, is pretty much next on my schedule.  I've got an adapter I made many years ago, but it's not suitable for mounting in the box, and there's no simple way to hook it up to the UT+ at the moment.
>
> Bob
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.


More information about the time-nuts mailing list