[time-nuts] inch/mm conversion

[Bob Stewart]

In fact, if you just copy through the word "when", it works without any cutting, pasting, or editing.




----- Original Message -----
> From: Mike Suhar <msuhar at woh.rr.com>
> To: time-nuts at febo.com
> Cc: 
> Sent: Wednesday, June 26, 2013 8:00 AM
> Subject: Re: [time-nuts] inch/mm conversion
> 
> You need to include all the text in that link through  the 29.  Copy to a text 
> editor, remove any carriage returns, then paste into your browser.
> 
> -------- Original message --------
> Subject: Re: [time-nuts] inch/mm conversion
> From: Nic McLean <mcleannb at bigpond.com>
> To: 'Discussion of precise time and frequency measurement' 
> <time-nuts at febo.com>
> CC: Re: [time-nuts] inch/mm conversion
> 
> I get error 404 page not found on that link.
> Nic
> VK2KXN
> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Stephen Tompsett
> Sent: Wednesday, 26 June 2013 6:20 PM
> To: time-nuts at febo.com
> Subject: [time-nuts] inch/mm conversion
> 
> FYI
> 
> http://www.npl.co.uk/reference/faqs/on-what-basis-is-one-inch-exactly-equal-
> to-25.4-mm-has-the-imperial-inch-been-adjusted-to-give-this-exact-fit-and-if
> -so-when-%28faq-length%29
> 
> --
> Stephen Tompsett
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>