[time-nuts] frequency reference for portable operation
lists at rtty.us
Tue Mar 12 07:35:11 EDT 2013
It's not just the hot enough to be lockable that you are after. You also are after a condition where you can tell the difference between several transitions. Locking to the wrong one isn't a good thing.
I suspect they do something like: wait for oven to cut back, then delay for xxx seconds. That's a lot easier than deciding based on a temperature sensor reading.
On Mar 12, 2013, at 7:25 AM, Magnus Danielson <magnus at rubidium.dyndns.org> wrote:
> On 12/03/13 12:03, Bob Camp wrote:
>> I'm not sure that the cheap ones really report back the temperature as part of the BITE. I suspect they report something more along the lines of "oven is not running all the time".
> I'm after "sufficiently high" here, as in lockable, and I wonder if not the LPRO already has that detection. Hope that it has a linear oven rather than bang-bang regulated.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts