[time-nuts] Building a Agilent Cross Correlated Phase Noise Measurement System.

John Miles jmiles at pop.net
Sat Mar 30 19:10:21 EDT 2013

Hi, Tom --

A paper in the 2010 EFTF described the use of a pair of 11848A boxes from
the 3048A system, which is similar to the E5500 hardware (
se/14_04_Bale.pdf ).  You could ping those authors if you haven't already.
Also, have you talked with Craig Nelson about his work with the NI
digitizers and T/H amps?  

The 70820A GPIB documentation is part of the overall 71500A reference guide
at http://cp.literature.agilent.com/litweb/pdf/70820-90051.pdf .

-- john, KE5FX
Miles Design LLC

> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-
> bounces at febo.com] On Behalf Of Tom Knox
> Sent: Saturday, March 30, 2013 10:17 AM
> To: Time-Nuts
> Subject: [time-nuts] Building a Agilent Cross Correlated Phase Noise
> Measurement System.
>  We are looking into using two N/E550XA/B Phase Noise systems and the
> 89410A to build a Cross Correlated measurement system.
> I was wondering if anyone has attempted this before? Does anyone know
> where to find the base GPIB command codes for the 70420A system?
> Thanks;
> Thomas Knox
> Phase Noise Measurement Group
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-
> bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list